K-Pop Demon Hunters – Line Art
Includes a press-fit stand, press it in from the corners. I included 2 stands, one on each corner, but you use only one in the middle!
- Uses about 44g of filament at the default size.
- Can be scaled down to fit an A1 mini or scaled up for larger printers.
- Important: Wait until the print bed is fully cooled before removing the model to avoid breaking it.
TIPS:
- Wash your build plate with hot water and soap.
- Use Arachne Wall Generator to best preserve quality.
- Bump up your bed plate temperature by 5 degrees.
- Use Avoid Crossing Wall setting at 200-300 mm to have less stringing.
- If your have a P1/X1/H2 series printer, consider turning off Aux Fan, otherwise the part the aux fan is on might warp!
Reaves
