December 28, 2025
Description
Simple friction/push fit mount for fan. "No-airguide" version is default version (pulling hot air from projector). Mount it on side closer to lens. Use USB fan on low speed or you can use USB/PWM Governor (from Aliexpress).
Versions:
120mm (airguide, no airguide)
140mm (airguide, no airguide)
80mm (airguide, no airguide) [ideal for original gimbal stand]
140mm extended mount - optional design
Use the air-guide version if you are pushing air into the projector. Use the no airguide version for pulling air from the projector. From my testing, the air-guide version creates noise if the fan is too close to the air-guide fins. This is much more noticeable at higher RPMs.
For mount you can use self tapping screws that comes with fan.
License:
Creative Commons — Attribution
xPakrikx
