Lens Flipper with Angle Indicators

This lens flipper prints in two halves which must be attached together.  Alignment holes with pins are included.  The handle will also need to be glued in, which can be done after the assembly of the two halves.  

This is a multi-color print with the indicator marks being a different color for visibility.  You can print this effectively in PLA with a 0.4mm nozzle and no supports.

For a complete assembly you will need two Flipper Halves, two Pins, and one Handle. When gluing the two halves together it is important not to glue the outer arches of the lens slot as they need to flex separately.