EVA Queen Shroud with Adafruit LIS3DH accelerometer mount

I wanted to try input shaping on my new RatRig V-Core 3 with a Duet 3 Mini 5+ and an Adafruit LIS3DH accelerometer, but the existing mounts seemed to be for the ADXL ones. So I remixed this to fit mine.

Some tips…

• Use a USB 3.0 cable for the wiring, I tried all sorts of cables but had all sorts of issues until I used this type
• Add hotglue to the wires
• You might need a little bit of superglue if the M2.5 bolts are too loose
• Oh, you'll need two M2.5 10mm bolts!

This is based on the wonderful work of Paweł Kucmus who contributed the original to the EVA project:
https://main.eva-3d.page/queen/