Cisa Fast Touch Locking System

Locking system designed for Cisa 59811 Fast Touch panic bars, created to keep doors equipped with this type of hardware open when needed. It’s particularly useful for emergency exits that also serve as main entry doors to buildings, where the handle is operated hundreds of times a day.

I designed this model to prevent wear and damage to the external opening handle and to avoid stripping the small unlocking screw located at the end of the panic bar, which can easily occur with frequent use. With this system in place, the door stays unlocked for as long as desired, ensuring smooth and consistent operation.

It’s easy to install and remove whenever needed, without compromising the door’s safety, mechanism, or any of its components. When the stopper is removed, the panic bar is released, instantly restoring normal locking from inside the building.

The system has been fully tested, offering a reliable and practical solution for everyday use in high-traffic access points.

It is recommended to print this model using materials such as ASA or ABS. 

Disclaimer

Cisa is a trademark owned by Cisa / Allegion plc, 2025 | Block D, Iveagh Court, Harcourt Road, Dublin 2, Co. Dublin, Ireland.

Locking System for Cisa 59811 Fast Touch is not an official Cisa or Allegion plc product, and I am not affiliated, sponsored, or endorsed by this company or any of its subsidiaries. This model is not a registered patent of Cisa / Allegion plc or their affiliates.

I acknowledge that the Cisa Fast Touch panic bar system is the intellectual property of Cisa / Allegion plc.

This project was created purely for personal and educational purposes, and I receive no financial gain from its publication or distribution.

I decline any responsibility for improper use of this model and/or for any damage of any kind or nature resulting from its use, installation, or modification. Users assume full responsibility for ensuring safe and appropriate application.