water tank drain pipe faucet

The original plastic pipe has lost his plasticizer over the years and in the end it broke.

I slightly modified the new one and put a 60° angle at the end of it instead of a 90° angle.

I printed the pipe on my Bambu Lab P1S with the following settings:

Material: ASA from Anycubic in White
Nozzle-Temp: 270°C
Bed-Temp: 80°C (Biqu CryoGrip Glacier)
Support: No
Nozzle: 0,4mm
Layer Height: 0,2mm
Infill: 15%
Wall Loops: 3
Bottom and Top Shell Layers: 5
Initial Layer Speed: 50mm/s
Outer Wall Speed: 150mm/s
Inner Wall Speed: 200mm/s
Infill Speed: 200mm/s
Travel Speed: 500mm/s
Fan Speed: 30%
Brim: Yes