AtomRC Gimbal v2 Drop In Conversion

I fully designed this in Solidworks from the ground up to convert the slide in style Gimbal v2 to a drop in style Gimbal. 

• There are 2 versions. One with threaded insert option and 1  you screw straight into plastic.

You will need to purchase the following hardware to convert this over: 

• Make sure you tune your holes!
• Follow the build instruction playlist below!

Required so your camera does not fall out

• 2 - M3 x 10mm
  •  M3 x 8 would work also. 6mm might be cutting it close.

Optional purchase if you want to upgrade:

• 1 - 4.3g metal gear servo similar to this:
  • https://a.co/d/d9MaX1K
  • https://a.co/d/6Otb20g
• M3 x 5 x 4 Threaded Inserts
  • https://a.co/d/3ayfp6u

Build guide! Don't forget to tune your holes below!

Very important and the holes in this project are really tiny! Check your holes :D

How I mounted the camera to the AtomRC Swordfish (Base plate added for Swordfish and Dolphin)

I tuned my holes by using this method: