Nokia CR 200 Charger 'Cog'

This is a replacement internal 'cog' for the Nokia CR200 charger.

If you have one, and the arms have gone slack then there is a tiny little piece inside that has likely broken or cracked. There's a community discussion where codekaizen---01 has posted a diagram of the piece.

I used this, to make one up in Fusion 360. I had to clean it up a little by scratching the edges smooth with a scalpel, but it went right in and fits snug.

When re-assembling, crank the internal cog to wind the spring. 2.5 turns gives the arms decent tension. If you re-grease the inside, only use a little bit of grease. It prevents the mechanism from turning.

Step by Step repair Guide: https://imgur.com/a/I8j0v

Nokia Manual: https://www.manualslib.com/manual/574829/Nokia-Cr-200.html?page=4#manual

Microsoft Community Discussion: https://answers.microsoft.com/en-us/mobiledevices/forum/mdaccessories/cr200-broken-plastic-guide/ddef2cbb-cc8c-4dc4-bb2a-db18209635f0

A metal one made by someone else you can get: https://www.shapeways.com/product/9PWPDVCMQ/nokia-cr-200-replacement-cam

Category: Parts