Belt Hole Punching Jig

Usage

1. Cut a strap 30mm (or 20)
2. Position the strap in the jig so the first hole is where you want the first hole on your belt
3. Flip it over so the jig is on top
4. Punch your first hole
5. Place the hole over the jig's nub
6. Punch up to three holes
7. Repeat from step 5 until your belt has enough holes 

Printing

• PETG
• 15% infill
• .20mm layer

Other

As always, let me know if you want other sizes, or have ideas about how to improve the model!