Horizontal WAGO 221 / 222 / 2273 Series Universal Connector Holders

Welcome, and thank you for choosing my model. 
I will provide some information for this model. 

Information

I have designed holders for the WAGO 2273, 222, and the famous 221 series, compatible with all available sizes of these connectors. For each series, there are variants that can hold 1, 2, or 3 WAGO connectors.

You can easily scroll down to find the desired size and connector type, and then select whether you want a holder for 1, 2, or 3 connectors.
At the bottom of this page, you’ll find the list and links to each WAGO connector holder for easy access.

The holders are optimized to use very little filament, making them fast and efficient to 3D print. The design is simple and can be easily printed on any Prusa printer without the need for supports or special settings.

Each holder has mounting holes between M3-M5 With a 2.5 mm chamfer ,allowing for easy installation on a mounting board, panel, or inside an electrical enclosure. You don'tneed to use all mounting holes. For example, on the 3-hole mount, you can use just one or two holes and will still be firmly secured. 

In the photo on the side, you can see that there is a small cutout. The purpose of this is to make it easy to insert and remove the Wago connector from the holder. When you insert the Wago connector into the holder, it will be firmly secured in place.

Wago Links

Happy printing!

Keep it save!