June 13, 2026
Description
Ditch the bulky factory plate holder. This slim, clean number plate holder is a direct replacement for the oversized stock unit on the Vespa GTS and GTV, giving the rear of your scooter a tidier, more streamlined look.
Designed around Australian motorcycle plate dimensions, the model is easy to modify if you need to suit a different plate size or country. Mounting holes are recessed for a neat, finished fit.
Road-proven: printed in Prusament ASA and ridden over 2,000 km without issue.
Slim, low-profile replacement for the large factory GTS/GTV plate holder
Sized for Australian motorcycle plates (easily modified for other regions)
Field-tested over 2,000+ km
Original design
Setting | Value |
|---|---|
Material | ASA (recommended for UV/weather durability) / PETG |
Layer Height | 0.2 mm |
Perimeters/Walls | 3+ |
Orientation | Print face down |
Supports | Required in the bolt relief holes |
⚠ ASA is strongly recommended — this part lives outdoors in full sun. PLA will sag and deform; ASA (or PETG as a backup) holds up to UV and heat. Print in an enclosure to prevent warping during print.
Print face down with supports in the bolt relief holes; remove supports cleanly.
Mount to the scooter using the factory mounting points.
Fit your plate and secure with bolts seated into the recesses.
Vespa GTS 300 and GTV 300 models
Plate fitment: Australian motorcycle plates (modify dimensions for other regions)
Made one for your Vespa? Post a photo — always great to see them on the road.
License:
Creative Commons — Attribution
9
SpiceWeasel
