Breville Nespresso UMilk Short Base

The standard base on the Breville UMilk Nespresso coffee maker is too tall to fit most of my mugs and cups, so I've created a short version. Photos included showing the difference between the tall (standard) base which doesn't fit a cup properly and the short (3D printed) base. The 3D printed base is as short as possible while still retaining the ability to insert a magnet (optional) in the rear to attach the base to the coffee machine like the standard base has.

The short base uses the grille out of the standard base. The base is designed to fit the grille firmly so it will hold up to many insertions and removals.

The recess for the magnet is sized to fit a commonly available 6mm x 3mm neodymium magnet which can be found cheaply on eBay or Amazon.

I'd recommend PETG due to the temperature of the machine and hot coffee.

The print settings I used were:
Prusa Mini+ Printer
Prusament Galaxy Black PETG
0.15mm quality layer height
3 Perimeters
40% gyroid infill
No supports needed

Should print fine with 0.2mm layer height at 15% infill if you want to reduce print time.