Voron 2.4 and trident rear wall cable duct

These parts are intended for use with my exhaust housing: 

www.printables.com/model/1348215-voron-24-and-trident-exhaust-housing

They require: 

• 2× M3x20 screws and 2× T-nuts for securing the lower section 
• 1 mm adhesive tape for mounting the clips 
• A 21 mm wide × 14 mm tall cutout in the center of the rear skirt to accommodate cable routing 

The parts are designed to fit a 3+1 mm backplate, and is optimized for use on an LDO Voron 2.4 350 mm machine. To ensure compatibility with 250 mm and 300 mm machines—or other backplate configurations—I’ll need someone to provide the necessary measurements for those models.