TBS SourceOne Hero 5/6/7 Mount | Fusion360 Files

Remix of a design not on this site.

Recreated the mount body in Fusion360 to have a clean model to work with. Modifying a mesh (and thus having a face consist of like 3000+ triangles) got old pretty darn fast. But since the design (for a different frame) was so awesome, I decided to recreate it. Main point is that the filter cap is hooked to the main body, rather than just slid on the protrusion of the camera, therefore it's basically impossible for the nd filter to fall off.

The original lens cap / nd filter holder is compatible with the recreated mount. I also included a modified version of it with a side-slot, so you can slide the glass in instead of having to bend the cap around the glass - useful for rather stiff 98A/95A TPU, but it's doable without the slot if you use a heat source to soften the material.

Same thing goes for the mount itself, heat it up with a heat gun before sliding in the GoPro and you'll get a perfect, snug fit.

Thickness of the TPU around the GoPro is 3mm all-around. Should be enough, going from my crash heavy experience without a broken gopro so far; otherwise: You can always edit it in the project files.

Same goes if you're using a different frame than the source one, should be rather easy to remix to other frames with the included project files.

Optimum print orientation for the mount is laying on its side.