2x 3.5" HDD Holder for Case Modding

• This bracket allows you to install two 3.5" HDDs anywhere you'd like. Intended for computer case modding. 

• Make SURE you print two of these, one NEEDS to be a mirror of the other. This is easy to do in your slicer software.
   

• You'll need a 3.5mm drillbit; measure up, drill the holes and you can then screw these blocks in to your case.

• You will also need M3 screws and nuts to secure it to the case. 
   

• Made in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues.

If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.