hose stand for indoor irrigation

This is a stand so you can position 10mm silicone hose over an indoor pot plant and hook up to a pump for irrigation.

To make one unit, print:

• 1x base
• 1x spout
• 4x end caps

Use 17mm square wood pole to make the the vertical and pole and horizontal feet. Cuts don't need to be exactly straight as the slots are deep enough to keep things square.

I used a glue gun to secure the vertical pole in the base, since its critical joint. Once assembled, secure hose with cable ties.

The end caps go on the end of each arm and are to account for the height of the base so don't skip them or it will wobble more.

Needs supports, have fun