makerfabs 4 channel LoRa mosfet case

This is a case for the Makerfabs LoRa 4 channel MOSFET driver board: https://www.makerfabs.com/lora-4-channel-mosfet-driver.html

Features

• Friction fit top and bottom case
• study chimney in lid to route cables to the mosfet
• Optionally cable tie wires to the chimney using the hole
• Recessed M2 nut holes in bottom of board. Push in nuts just like building a Prusa printer and use M2 12mm bolts to secure the board
• Keeps water, dust, etc away from your board

Print settings:

• Bottom: no support, print flat side down
• Top: print on side (important), supports: on