March 9, 2022
Description
These are cargo net clips designed for 00-05 Pontiac Bonnevilles. They may work with other years and models, but that is not known.
These are designed to replace the factory push lock style cargo net clips, and these will screw/thread on instead. They do not print threaded, but should self thread easily with a nut driver, ratchet, or a very very light duty impact/drill.
The first head is 13mm, and the shank is 16mm, I used a hex here because I did have one of mine break on me and it was a pain to remove, so the hex should make it much easier if that happens.
The supports are built into the model, as long a you print with 0.2 mm layer height you should have no problems. These supports are designed to be 1 layer away from each surface, so your slicer may detect them as an overhang, but they have yet to fail for me and always remove super clean.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
25% rectalinear
Filament: Overture PLA Black
Notes:
Like I said, no supports, 0.2mm layer height, standard 0.4mm nozzle.
Clip Supports
The Radial supports for the flange will probably break off on removal, if not, use a set of flush/side cutters to break them off. The large diameter ones may leave a little bit on the inner right, if that bothers you you can cut it off, it shouldn't hinder usage.
The supports under the net hooks should be grabbed with side cutters or needle nose pliers and twisted, they should remove very easily.License:
Creative Commons — Attribution — Noncommercial
9
Bupher
