Wago WINSTA MINI Power Distribution Face Plate

==========================================================================

There are two versions of this faceplate: a flat version and one that is elevated slightly. Both of their parameters are the same.

These models can be printed as is (3 plug slots), or parameterized through Fusion360.

Parameters:

• Plate_Width
• Plate_Height
• Plate_Thickness (Up to 3mm for non-lite version)
• Connector_Quantity_Horizontal (Columns)
• Connector_Quantity_Vertical (Rows)
• Knockout_Distance_Horizontal (Left to right hole spacing)
• Knockout_Distance_Vertical (Up and down hole spacing)

Necessary accessories:

Please note, some of these parts and their quantities below are only necessary depending on how you want to configure your power distribution. Refer to Wago for full details like ratings and part numbers depending on your needs. All of the below part numbers are from Wago except for the M5 hardware. Please note that Wago offers more part numbers for various connector colors/male-female configurations.

For the standard 3 connector .stl file configuration, the part numbers and quantites are:

• 890-103 or 890-113 (3)
• 890-703 or 890-713 (3)
• M5 button head screws (2-4 for mounting the plate)
• Cables and wire (Refer to Wago catalogs for min and max sizes)

Recommended Print Materials:

• Any hard print material (not TPU)

==========================================================================