ELU TGS 173, 271, 273 emergency stop switch case

This is a sparepart for "newer" ELU TGS-Series chop and table saw (173, 271, 273 and so on). This is the housing body of the emergency stop switch. The original was made of PA6 (Nylon), but PETG will work fine as well. 

May also fit some DEWALT machines like DW 742 or DW 743 which are nearly identical. 

Print instructions

• Use PETG
• 0.2 mm Layer height
• supports needed (see g-code file)
• 100 % infill
• 4 perimeters