ATOTO 9" fascia plate/adapter RAV4 (gen2)

The double din 9" atoto X10 is all you need in addition to this fascia plate, to make your life easier I do recommend looking for a wiring loom to go from the stock connectors to standard ISO…. but i didn't and manually connected all the wires to the harness and that worked fine but was more work.

https://nl.aliexpress.com/item/1005007992138047.html?spm=a2g0o.store_pc_allItems_or_groupList.0.0.167a1762zdbfRI&pdp_npi=4%40dis%21EUR%21%E2%82%AC%20915%2C93%21%E2%82%AC%20491%2C99%21%21%211053.52%21565.90%21%402103963717583595217388952ec7bc%2112000043189177652%21sh%21NL%210%21X&_gl=1*1bybp5j*_gcl_aw*R0NMLjE3NTgzNTkyODAuQ2p3S0NBandvYm5HQmhCTkVpd0F1Mm1wRlBJdDFnRHkwQ1M4eFdXamV3dUpidVhzX0Z0ai1PUU4wNkE3aVVnb0RDRHdIeWl1M2s1UDdCb0N4RVVRQXZEX0J3RQ..*_gcl_dc*R0NMLjE3NTgzNTkyODAuQ2p3S0NBandvYm5HQmhCTkVpd0F1Mm1wRlBJdDFnRHkwQ1M4eFdXamV3dUpidVhzX0Z0ai1PUU4wNkE3aVVnb0RDRHdIeWl1M2s1UDdCb0N4RVVRQXZEX0J3RQ..*_gcl_au*MTAxNDAzOTY1NC4xNzUzMjY3NjU4*_ga*MTk0NDIxODczNi4xNzUzMjY3NjU2*_ga_VED1YSGNC7*czE3NTgzNTkyNzkkbzE2JGcxJHQxNzU4MzU5NjE2JGo1NiRsMCRoMA..&gatewayAdapt=glo2nld

You only need 2 M4x8 screws that connect the screen to the printed part and then you can just click it into the square hole where the old radio used to be.
I recommend hooking the left side in first, then the bottom one and then with a slight press and some butt clenching you can “click” it into place. 
When removing it i recommend starting on the right side and pulling it out of the dashboard from there.

I'm not sure how it would fit on the earlier gen2 RAV4 models because i know the dashboard is different.

Don't forget to check out my steering wheel control mounting!