March 10, 2022
Description
I had the problem that my printer was over- or underextruding with the calculated flow rate, so I made these simple flow calibration cubes.
Just print the parts with the corresponding extrusion multiplier and see what looks best. You want a smooth surface on the cube without any blobs. For me most of the time I just printed the 100 for reference and the 90 and set the multiplier in between.
Use your daily print speed and settings.
PS: If 90 is under extruded and 95 over extruded, just use 92 or 93…. ;)
Worked for me 100%
License:
Creative Commons — Attribution — Noncommercial
7
moddok
