Cased Pixel 9 Pro Fold Charging Stand with Headphone Charging

Introduction

Tired of multiple cables cluttering your desk? I designed this sleek, all-in-one charging stand to keep my most-used devices topped up and organized. It supports charging your phone in both the folded and unfolded states, but really was designed to charge while unfolded. What's the point of all that screen if you're not appreciating it anyway?
It's a perfect desk companion, holding your Cased Pixel 9 Pro Fold phone at a great viewing angle while also charging your earbuds in its clever hidden charging compartment.
It was specifically designed to fit the case I have (A Miimall case) but it will also work with other cases of similar dimensions (max width 155mm, max thickness of screen side 7.9mm, max thickness of camera side 8.2mm), and will also work if you don't have a case too, although the fit will be a little bit loose. 

EDIT: a second model has been added with around 1.2mm extra clearance along the edges, to hopefully support cases like the Dbrand Grip. I don't have a Dbrand Grip case though so cannot test if it works. If somebody wants to buy me a Dbrand Grip case, let me know :P

It is perfect for monitoring a dashboard, watching videos, or taking video calls.
It includes two press fit cutouts for Apple MagSafe charging pucks (although I used cheap clones). Their dimensions should be 55.9mm diameter, around 5.9mm thick.

Printing advice

• This model requires zero supports, although if your printer has particularly terrible cooling you may wish to support the cable holes at the back of the model.
• Any material will do, although the wireless charging puck that charges your phone may get hot. That is why there is a large gap behind it. While it is not necessary, you may wish to thermally epoxy a heat sink to the BACK of your wireless charging puck, taking care to find one that fits inside the hole I provided. This will help draw heat away from your phone.
• Layer height: Given the curves in the model, if you're using a good matte filament, feel free to use adaptive layer height. Otherwise a layer height of 0.2 is sufficient.