Design: Authentic miniature top hat with snap-fit attachment—no glue or tools required.
Assembly: Zero-support print with integrated snap mechanism for easy installation on Labubu monsters.
Speed: Two components print in approximately 2 hours total (top: 51 minutes, brim: 1h 10 minutes).
Print Settings (Tested on Ender-3 V2)
Setting
Value
Total Filament
5.01 m (top + brim combined)
Total Weight
6.26 g
Total Print Time
2h 0m 23s
Material
PLA
Supports
None required
Layer Height
0.20 mm (standard)
Nozzle/Bed Temp
218°C / 70°C
Component Breakdown
Top Hat Top — Main crown structure (2.27 m filament, 50m 52s print time)
Brim — Brim ring for improved bed adhesion and authentic hat shape (2.74 m filament, 1h 9m 31s print time)
Printing Notes
Use brim on the… brim for optimal bed adhesion
Ensure clean first layer for snap-fit mechanism to function reliably.
Optimized for Ender-3 V2 with BLTouch bed leveling.
Post-print: Light sanding of snap edges improves fit if needed.
Community Note: If you print one, share your Labubu styling! Let me know how the snap fit works and if you have suggestions for future accessory designs.
MindCubby
