Filament Rack

You need two wall mounted brackets per spool rack and two 1 inch wooden dowels. Each wall mounted bracket includes 4 parts:

1. Bracket Skeleton

2. Bracket Insert Inner

3. Bracket Insert Outer

4. Bracket Shell

To get started, follow the steps below:

1. Do all of the necessary measurements and leveling to figure out where you want your brackets to be placed on the wall. Make sure there are studs behind your wall where you mount your brackets.

2. Screw the Bracket Skeleton into your wall using two wood screws (make sure you are screwing into a stud or use heavy duty wall anchors).

3. Repeat this process with the mirrored Bracket Skeleton on the other side.

4. Slide the wooden dowels in the slots in the Bracket Skeletons.

5. Insert the Bracket Inserts into both Bracket Skeletons to lock the wooden dowels in place.

6. Slide the Bracket Shell over both Bracket Skeletons.

7. Done!

Important Note:

The .stl part files listed below are for the left bracket assembly. To get the right bracket assembly printed, just mirror all of the parts in your slicer and print.

There is a .3MF file provided that has the all parts including the mirrored variants.