Another Big Einsy Case for Bear Upgrade

See my first remix at https://www.prusaprinters.org/prints/147328-big-einsy-case-for-raspberry-pi-zero-w-2 for the basic description.  To mount to the Bear frame use (4) M5x10 button head screws.  If you are not mounting a fan, just screw the fan screen onto the cover with M3x10 countersunk screws.

I mounted the power supply outside an enclosure, so I added a zip tie anchor and opening through the cover for the “Front Exit" model.

Then I saw what Mr.Baham did at https://www.prusaprinters.org/prints/15544-prusa-mini-usb-mod-v2 and incorporated that so I can connect a webcam without opening the case.  This is in the “…w USB” model.  Note that this works with this connector that I bought on Amazon, and may need to be adjusted for others “CableCreation Micro USB 2.0 OTG Cable Flat On The Go Adapter Micro USB Male to USB Female”

Edit- I found that the fan screen causes a high pitched whiny noise.  I designed alternate “aero inlet” and “simple bezel” and recorded the RPi temps during a print.  The original screen had the highest temp at 35.9 C, with the bezel at 34.3 C, no noise, and the aero at 33.8 C and a little noise.  I have included these stl files as well, and I am now using the simple bezel.