Full-size Steam Machine placeholder

This matches the stated dimensions of 152 mm tall, 162.4 mm deep, and 156 mm wide. If you want to match the weight of 2.6 kg, try checking around 55% infill depending on the type. For grid I found ~53%, and gyroid 58%.

The front and back features are chamfered to prevent all overhangs. The feet aren't modeled, but the overall print is as tall as the Steam Machine when including the feet. I had trouble getting the diagram from the store page to line up exactly with the given dimensions, so please take the front and back elements to be a representation instead of precise.

I found it challenging to avoid warping and to get a good surface finish, but I figured it was better to post this than sit and tweak my print settings. I tried using very low gyroid infill for faster print times, but it made for too much bridging for a good quality top layer infill. Support cubic worked well. 

Fusion 360 and STEP source included.