MP Mini Delta V2 Bed Alignement Clip

I had some poor print quality on my MPMDv2, turned out the bed was sliding around from the nozzle movements.

Print these to put push back against these movements.

They are mounted under the swivel lock that hold the bed down. Make sure they push the bed from the sides and aren't stuck under it. Test that the 3 buttons under the bed clicks properly when you bredd she bed in the probe spots after mounting everything back together.

Print Settings

Printer Brand:

Monoprice

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2mm

Infill:

Filament: Prima Easyprint PLA Blue

Notes:

Category: 3D Printer Parts