December 2, 2023
Description
A little helper to keep the plug and wires in place while soldering everything together.
When I do my soldering I always keep the male and female together in case things get a bit hot. That way the pins always stay in place and don't shift. The plug just slides into the box and either or end will fit in nicely. You can temporarily tape your mount and battery in place to prevent movement and once don't simply peel the tape off and remove your assembled part.
I printed it with generic PLA @ 20% infill without support.
If you are in need of one for the XT line-up of JST plug you can find them here…
https://www.prusaprinters.org/prints/117183-xt30-xt60-xt90-solder-assistant
https://www.prusaprinters.org/prints/128410-mpx-solder-assistant
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
Guyzerr
