Brassmaster GGG Stompbox

If you like it buy me a coffee! https://ko-fi.com/ilrost

This stompbox is based on the Brassmaster clone project from GeneralGuitarGadgets.
If you’re the plug-and-play type, you can simply order the PCB with all the components.
If you’re a bit more adventurous (like me), you can print and build everything at home.
 

https://generalguitargadgets.com/effects-projects/bass/maestro-brass-master/

The enclosure is designed for the 3-knob version and includes a dedicated compartment for a 9V battery.

The parts list for the stompbox can be found at the following link:
https://generalguitargadgets.com/pdf/ggg_brassm_bom.pdf

I used M3 heat-set inserts to mount the PCB and secure the case.

it was designed to accommodate a LED case
 

DC Jack switch specs

it is necessary

• 8 M3x5.7x4.6 insert nuts brass
• 4 M3x10 countersunk screw
• 4 M3x10 plastic screw screws with plastic washer for PCB
• 1 LED Holder panel diameter 8mm
• 1 DC jack switch

The top shell is made of three additional plates that can be printed separately and glued together, or printed as a multi-color/multi-material piece. It’s compatible with any 3D printer.

Full wiring details can be found on the project page.

https://generalguitargadgets.com/effects-projects/bass/maestro-brass-master/