November 19, 2025
Description
Use these models to mount up to 7 or 9 2.5" SSD (SFF) drives to your 120 mm fan. Or mount it directly to the case in place of a fan. Disk mounting holes for standard SSD M3 screws.
Print with the backplate against the build plate.
The hexagon versions prints without support.
The high airflow models needs supports to print. I have successfully printed with the following:
Type: Tree Auto
Threshold angle: 30 degrees
Recommended material: PETG/ASA/ABS
I think PLA will work, however, under certain circumstances I believe it might get too hot around the drives that it might weaken the PLA.
License:
Creative Commons — Attribution — Noncommercial
8
Svettis
