bulb holder for atlas lamp

This is a bulb holder to fit this cheap E14 lamp holder from amazon: https://www.amazon.com.au/dp/B09WKQK4DH

Into the atlas lamp printable: https://www.printables.com/model/165407-atlas-lamp

I put a Philips Hue bulb in it and now I have a remote controlled globe that I can choose any colour with. The holder spaces the light properly and the metal clips keep it in place. Print vertically with no supports or on its side with supports for added strength.

After printing, secure the bulb in the holder with a cable tie and pull as tight as you can - or bulb will fall out.

Only use cool LED lights with this holder - it plugs the hole and seals in heat, no good for old fashioned light bulbs that get hot - probably will burn your house down!