This is a remix of the “PSVR2 IEM/Earbud Adapter” by s16n. Thank you!
My version makes a few quality-of-life improvements:
- Wider cable channel so the earbud cable can loop back and forth up to four times without binding
- Corrected hole spacing for a cleaner, more secure fit on both the 3.5mm audio plug and the adapter plug
- Zip-tie slots for better cable management
Two versions are included:
- 1MORE Triple Driver edition: Optimized specifically for those earbuds
- Generic edition: More open around the jack area so you can use other headphones
If you only use your earbuds with the PS VR2, this design will work better than the original. If you frequently remove your earbuds for other devices, you may prefer the original s16n model instead, or not use any adapter.
Printing notes:
- The holder can be printed in any material. I used PETG.
- The plug must be printed in TPU.
- Use a flexible adhesive (Shoe Goo, E6000, etc.) to glue the TPU printed Stud to the other printed part.
- You'll need small zip ties to secure the headphone cables to the adapter.
Ninova66
