Bambu 4-1 adapter mount for AMS flipper

The original was meant for a y split between the AMS buffer and the printer but I use the 4-1 adapter so I created this mount.  

I use a different setup where The rotational action may have been great in the original, but my 4-1 adapter is run BEFORE the AMS buffer  (AMS → 4-1 → Buffer → print head) and I needed something more rigid so I added an additional pin to keep the 4-1 steady. 

You can use this before or after the buffer, you will need the mounting bracket from the original build and you will need to cut the fin off of the 4-1 adapter. 

If you are using this before the buffer, be sure to mirror the mounting bracket from the original file.