PSX2Amiga Snap Fit Case

This is a simple snap fit case for the excellent PSX2Amiga gamepad adaptor by SukkoPera.

You can find details for the adaptor itself on his GitHub page by following the link below:

https://github.com/SukkoPera/OpenPSX2AmigaPadAdapter

There are 3 different lids for the case provided. One is solid and has no opening to be able to see the LEDs. The one with "+ LED Holes" in the filename, has two holes that allow you to look in and see the LEDs on the board, the holes are sized so that you can insert small lengths of 1.75mm transparent filament to act as light pipes. This allows for the light from the LEDs to be seen without having to look directly inside the case. The last one with "+ 3mm LEDs" in the filename has holes sized to allow for 3mm LEDs to be inserted,

Please head over to SukkoPerra's GitHub page and check out some of his other awesome work

https://github.com/SukkoPera

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Supports:

Resolution:

Infill:

Filament: Sunlu PLA Category: Electronics