Greaseweazle F7 Snap Fit Case

This is a case for the excellent Greaseweazle F7 from Keir Fraser.

I am not a fan of cases that require screws so designed this which simply snaps together. There are two different lids available. One is solid and has no openings for the LEDs, and the other has two openings which allow for a piece of 1.75mm transparent filament to be inserted to use as a light pipe and allow you to see the LEDs with the case closed. You could use this lid without the filament light pipe and just look in the holes to see the LED too.

There are also two different cases called "2mm Snap Closure" and "3mm Snap Closure". The only difference is the thickness of the side walls and snap mechanism. The 3mm version should give a stronger snap.

I have released the STL files and Step files for you to modify as you require. My only request is that you add any modified versions as a remix here for others to use. Also please do not sell this case for more than the production cost and postage. It is a small item using only 20-25g of filament depending on your slicing settings so is extremely cheap to print. Thanks.

More details on the Greaseweazle can be found on the link below

https://github.com/keirf/Greaseweazle

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

Supports:

Resolution:

Infill:

Category: Electronics