November 22, 2025
Description
This bedsidestocking hook has been designed from the ground up with 3D printing in mind.
A single piece stocking hook. Print on its side for best strength.
Printing and Assembly
The hook shown in photos was printed at 0.2mm layer heights using a 0.4mm Nozzle. It should print well with larger nozzles, although the crisp edges may become more rounded.
V1 is the version shown in the photo. V2 is a strengthened version included for heavier stockings or presents.
Based on your bed performance, a brim may be required to prevent warping.
I printed with 15% adaptive cubic infill and two walls and had great results. There is no requirement for supports.
Required Parts
No additional parts are required for this project.
License:
Creative Commons — Attribution — Noncommercial
7
Franks3y
