Dragon Eye

I made an eye for stuffies.  Its a true multi-material print, FDM and SLA.  There are parts printed out of PLA and clear resin.  The FDM parts were made on the Prusa Core One.  The SLA parts were made on the Elegoo Saturn 2.

Assembly: Put the iris onto the pupil, you can use glue or not.  Place the lens over it.  Use clear resin as glue to put the stem into the lens.  I used a laser to cure them together but any UV light should work.  

To prepare the lens I gave it a coat of clear acrylic spray pain.

After its all done just put the stem into the stuffie you are making and lock it in with the lock piece.  Depending on the material you use to make those they are probably one-time-use only.