Guitar Pick Collection

This is a collection of different guitar picks. I made three different types, each in three different thicknesses. 

Print Settings

• Print the picks with a size of 0.20 mm using ABS or a 0.2 mm nozzle. Ideally, use both. This is not absolutely necessary, but it can extend the service life.

• Do not turn on the brim for the sharkfin picks, as the honeycomb pattern is then difficult to remove from the brim. 

Important informations

 0.20 mm picks are very small and are intended more for chords than for plucking. If you pluck too hard, they can quickly bend or break. 

I made the picks in three different sizes. If you want different thicknesses/sizes, you can scale them yourself in the slicer. 

If you have any other ideas, please let me know. If you have any problems, just write them in the comments and I'll see how I can help you :)