different housings for GaggiMate LilyGo S3 AMOLED 1.75 inch, smthng housing 4

All smthng display housings for GaggiMate: https://www.printables.com/@dubios42/collections/2861668 

Support my work: https://ko-fi.com/modsmthng

Latest update (12 June 2026): Reduced the screw hole diameters, increased the wall thickness around the screw holes, and raised the stabilizing rib for a more secure and stable fit. Additional clearance has also been added around the flat display cables to improve cable routing and reduce mechanical stress. Reworked variation 3.

I have created various housings, which you can find here. The first two are the easiest to modify.

• Var0: simple housing, easiest to modify 

• Var1: with hole for plug 

• Var2: top mount for Gaggia Classic and Rancilio Silvia 

• Var3: same as variation 1, but with slanted bottom so that the display can be used as front mount, for example

• Var4: Top mount with more centered seating, slightly more difficult installation

Two small screws, M1, 1.4 mm x 5 mm, should be used; further information can be found in the attached PDF.
Please note that I only provide the housing and do not provide instructions for wiring. The information provided here is only a suggestion; please check everything yourself.

All additional information you need can be found in the PDF in the files.

• Print with 0.12mm layers or use variable layer height  for the best result

• Use "detect thin walls", or"Arachne" as wall generator

• Print Var 2 and Var 4 on the slanted bottom

• Optional: use support, brims and/or glue, if you have problems with adhesion:

• Use painted support for Var 2 and auto support for Var 4 housings if you have adhesive problems