MiniBFI for Trident

I modded BT123's miniBFI idlers (which were based on Clee's Beefy Front Idlers) to get more belt tensioning travel on my Trident Stealthchanger build. When mounted flush with the Y linear rails, these provide just enough clearance in front for the Tapchanger liftbar

Requires per idler:

• x2 M3 heatsets

• x2 M3x30 FHCS flat head cap screws

• x4 M5x10 BHCS button head cap screws

• x4 M5 Roll-in nuts

• x1 5x18mm pin OR M5x16 BHCS screw (to hold the bearings)

• x2 F695 bearing (can re-use from stock idlers)

• x2 5x7x1mm shim (can re-use from stock idlers)