MiniSkidi v3 arms with printed text

To print, import both arms into the slicer, then add a part to each selecting the text for the correct arm. The text will load in the right location & orientation. 

Text elements are 0.25mm thick so print on 0.2mm layer settings with just one colour change.

I don't have an MMU/AMS so the examples in the photo were done with manual colour changes just fine.

For these I used 3x perimeters, 15% infill, and structural print settings, Filament is eSun PLA+ in yellow and black

Apologies if this is a duplication, but I couldn't see any others like this.