Virtual Pinball DMD Support Bracket for Magnet-Mounted Installations (PinballCabinet.com Flatpack Compatible)

This support bracket is designed for builders using the Virtual Pinball flatpack from PinballCabinet.com and following the magnet-mounted DMD installation method shown by WayOfTheWrench. His approach uses cabinet door magnets to make the DMD panel easily removable while keeping the front of the cabinet clean and hardware-free.

While the magnets provide excellent hold, the DMD panel can still benefit from added stability and due to the PinballCabinet.com dmd panel being about 40mm shorter than the cabinet internal width, they do not make the best contact. This bracket solves that by giving the DMD panel a structured support point that improves the contact with the magnet system and DMD and prevents the DMD from sliding off them.

Key advantages:

• Added rigidity for the DMD panel when mounted with cabinet door magnets

• Supports the DMD from underside without blocking magnet or access

• Works with the exact magnet hardware shown by WayOfTheWrench

• Installs behind magnets and improves long-term reliability and alignment

• Works with these magnets specifically: Cabinet Door Magnets Amazon Link

This is the ideal upgrade for cabinet builders who want the clean magnet-mount aesthetic and the durability of proper internal support. It maintains the convenience of removable access while adding the structural reinforcement that magnet-only setups are missing.

Print Settings

• Infill: 20%

• Walls/Perimeters: 4

• Layer Height: 0.2 mm

• Supports: Not required

• Brim: Not required