HK Ranger

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm

#080a0d PLA PolyLite Black Transmission Distance: 0.3 #9c0087 PLA+ Sunlu Fuschia Transmission Distance: 5 #d22332 PLA+ Sunlu Red Transmission Distance: 6 #ff8000 PLA+ Sunlu Orange Transmission Distance: 5 #ffcaa6 PLA+ Sunlu Skin Transmission Distance: 5 #ffd500 PLA+ Sunlu Pure Yellow Transmission Distance: 5 This print uses 6 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Fuschia At layer #10 (0.88mm) swap to Red At layer #12 (1.04mm) swap to Orange At layer #14 (1.2mm) swap to Skin At layer #22 (1.84mm) swap to Pure Yellow for the rest.