SF Martial Artist

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm 

The Model is 133.33x200mm in size 

You may print at higher layer heights below the Base Thickness of 0.48mm 

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm 

#000000 PLA+ Sunlu Black Transmission Distance: 0.6 #d22332 PLA+ Sunlu Red Transmission Distance: 6 #ff8000 PLA+ Sunlu Orange Transmission Distance: 5 #ffcaa6 PLA+ Sunlu Skin Transmission Distance: 5 #e4bdd0 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 #ffffff PLA+ Sunlu White Transmission Distance: 5 #ffd500 PLA+ Sunlu Pure Yellow Transmission Distance: 5 

This print uses 7 unique filaments 

Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Red At layer #12 (1.04mm) swap to Orange At layer #14 (1.2mm) swap to Skin At layer #19 (1.6mm) swap to Sakura Pink At layer #21 (1.76mm) swap to White At layer #23 (1.92mm) swap to Pure Yellow At layer #25 (2.08mm) swap to Orange for the rest.