TechnoLine WT 536 / 538 Projection alarm clock Wall mount bracket

Wall mount bracket for the TechnoLine WT 536 or TechnoLine WT 538 Projection alarm clock with cable storage compartment.

This bracket is used to mount the projection clock on a vertical surface in order to achieve the optimal position for time projection.

Printing recommendation:

0.4 nozzle, 0.2mm structural, no supports

Mounting recommendation:

Mount the bracket at two points with a horizontal hole spacing of 140mm using countersunk screws with a diameter of 3-3.5mm

Feed the plug through the opening on the bottom or side and tuck the remaining cable into the compartment behind the alarm clock. Slide the projection alarm clock into the recess and connect the cable to the clock. Connect the power supply to the mains power supply. Adjust the projection beam as desired.