November 26, 2025
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 136.83x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm
#000000 PLA+ Sunlu Black Transmission Distance: 0.6 #977133 PLA+ Sunlu Coffee Transmission Distance: 3 #d22332 PLA+ Sunlu Red Transmission Distance: 6 #ff8000 PLA+ Sunlu Orange Transmission Distance: 5 #ffcaa6 PLA+ Sunlu Skin Transmission Distance: 5 #ffd500 PLA+ Sunlu Pure Yellow Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Coffee At layer #9 (0.8mm) swap to Red At layer #11 (0.96mm) swap to Orange At layer #13 (1.12mm) swap to Skin At layer #21 (1.76mm) swap to Pure Yellow for the rest.
License:
Creative Commons — Attribution — Share Alike
hikikomorick
