Tube Squeezer / Tubenentleerer v2 (for metal tubes) - 40-85mm

A simple printable tool to better empty (metal) tubes like tomato paste, mustard and co. 

Version 2.0 (2023-11-21):

• I have recreated the "Tubeentleerer" by Boomi and slightly reworked the design, so the dimensions are very similar to the original. The thickness was reduced from 8 to 7mm, the shape was minimally adjusted and a chamfer was added. The slot measures about 2.5mm, with a small thickening of 0.25mm in the center. Otherwise, the simple but functional design (as you can see) has been kept. For tubes from 40 to 85 millimeters (+1 mm), each in increments of five. If you need other widths just ask. :-)

Version 1.0 (2022-03-05):

• This is basically a remix "Tubeentleerer" by Boomi; the design is simple but functional. However, the original was too long for me, so I created different sizes based on its design - for tubes from 45 to 75 millimeters, each in steps of five.

Print instructions:

There is not much to consider, the tools are quick and above all easy to print. No matter whether 0.15, 0.20 or 0.25 mm layer height. 2-3 perimeters are also sufficient. But since the contact area is small, the first layer height should be adjusted halfway correctly ;-)

Wanna say thank you? 🙏

Feel welcome to use this link for your next Amazon purchase or send me a coffee via PayPal. :-)