3D Scanner Tiny Marker

BOM:

• 3x ID 3mm / OD 6mm

• 3x ID 6mm / OD 10mm Scan Markers

• 1x 8x3mm Round Magnet

• 1x M4x10mm Socket Head Cap Screw

INSTRUCTIONS:

The Model is about 50mm Tall with a 40mm Diameter requiring neither Supports nor a Brim.

There are to Versions of it, one for accepting an M4x10mm Socket Head Cap Screw ( acting as a Weight and for placing onto Rotary Table ) and another for accepting an 8x3mm Magnet ( for attaching to metal Surfaces - Will wander on the Rotary Table! )

To aid with 3D Printing the Counter Bore Hole of the M4 Variant under Bridging you'll need to enable Bridge Counterbore Holes > Sacrificial Layer:

I've designed their Bottoms as a Separate Part to be colored in a Different Filament for easier telling apart.

You'll be needing 3x ID 3mm / OD 6mm and 3x ID 6mm / OD 10mm Scan Markers per Tiny to populate it like in my Suggestion.