Rlaarlo AK-917 Battery Tray Riser

I designed and printed this battery riser so the AK-917 can fit taller batteries, my Ovonic 3s 5200 was a bit too big to fit. It works together with the original rear battery clamp arm and a redesigned front part. The riser just lifts the arm a bit higher and the front part is completely remade to accommodate the new height, the post was a weak point so I made it to fit a m3x35 screw. Nice and solid now.

That little piece I called “Nub” is to fit in the redesigned front piece, I tried to depict where it goes in the pictures, if having trouble placing it just look at the original, Also its tapered so put the smaller end in first, probably want to print it with a brim. Shouldn't need glue for it. 

Also use support blocker for the upper end of the post, kinda hard to get support out of there. I also tried to depict that in one of the pictures.

Also also you may need a longer screw for the arm. ~30-35mm maybe, I don't remember what size I used for that, will check next time I get in there and confirm and update.